spaces

Cisco CCNA & CCNP Certification Training Course


  1. • Interconnecting Cisco Networking Devices: Accelerated (CCNAX 200-120)
  2. • Implementing Cisco IP Routing (ROUTE 642-902)
  3. • Implementing Cisco IP Switched Networks (SWITCH 642-813)
  4. • Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT 642-832)

Cisco CCNA® Cisco Certified Network Associate (CCNAX 200-120)

CCNA Composite Exam: The 200-120 CCNAX is the composite exam associated with the Cisco CCNA Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices: Accelerated (CCNAX 200-120) v2 course. This exam tests a candidate's knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include all the areas covered under ICND 1 and ICND2 Exams. Operation of IP Data Networks

  1. • Operation of IP Data Networks
  2. • Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs.
  3. • Select the components required to meet a given network specification.
  4. • Identify common applications and their impact on the network
  5. • Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models.
  6. • Predict the data flow between two hosts across a network.
  7. • Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN
  8. LAN Switching Technologies
    1. • Determine the technology and media access control method for Ethernet networks
    2. • Identify basic switching concepts and the operation of Cisco switches.
    3. • Configure and verify initial switch configuration including remote access management.
    4. • Verify network status and switch operation using basic utilities such as ping, telnet and ssh.
    5. • Identify enhanced switching technologies
    6. • Describe how VLANs create logically separate networks and the need for routing between them.
    7. • Configure and verify VLANs
    8. • Configure and verify trunking on Cisco switches
    9. • Configure and verify PVSTP operation
  9. IP addressing (IPv4 / IPv6)
    1. • Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
    2. • Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment.
    3. • Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.
    4. • Describe the technological requirements for running IPv6 in conjunction with IPv4 such as dual stack
    5. • Describe IPv6 addresses
  10. IP Routing Technologies
    1. • Describe basic routing concepts
    2. • Describe the boot process of Cisco IOS routers
    3. • Configure and verify utilizing the CLI to set basic Router configuration
    4. • Configure and verify operation status of a device interface, both serial and ethernet
    5. • Verify router configuration and network connectivity
    6. • Configure and verify routing configuration for a static or default route given specific routing requirements
    7. • Manage Cisco IOS Files
    8. • Differentiate methods of routing and routing protocols
    9. • Configure and verify OSPF (single area)
    10. • Configure and verify EIGRP (single AS)
    11. • Configure and verify interVLAN routing (Router on a stick)
    12. • Configure SVI interfaces
  11. IP Services
    1. • Configure and verify DHCP (IOS Router)
    2. • Describe the types, features, and applications of ACLs
    3. • Configure and verify ACLs in a network environment
    4. • Identify the basic operation of NAT
    5. • Configure and verify NAT for given network requirements
    6. • Configure and verify NTP as a client
    7. • Recognize High availability (FHRP)
    8. • Configure and verify Syslog
    9. • Describe SNMP v2 & v3
  12. Network Device Security
    1. • Configure and verify network device security features such as
    2. • Configure and verify Switch Port Security features such as
    3. • Configure and verify ACLs to filter network traffic
    4. • Configure and verify an ACLs to limit telnet and SSH access to the router
  13. Troubleshooting
    1. • Identify and correct common network problems
    2. • Utilize netflow data
    3. • Troubleshoot and correct common problems associated with IP addressing and host configurations.
    4. • Troubleshootand Resolve VLAN problems
    5. • Troubleshoot and Resolve trunking problems on Cisco switches
    6. • Troubleshoot and Resolve Spanning Tree operation issues
    7. • Troubleshoot and Resolve routing issues
    8. • Troubleshoot and Resolve OSPF problems
    9. • Troubleshoot and Resolve EIGRP problems
    10. • Troubleshoot and Resolve interVLAN routing problems
    11. • Troubleshoot and Resolve ACL issues
    12. • Troubleshoot and Resolve WAN implementation issues
    13. • Troubleshoot and Resolve Layer 1 problems
    14. • Troubleshoot etherchannel problems
  14. WAN Technologies
    1. • Identify different WAN Technologies
    2. • Configure and verify a basic WAN serial connection
    3. • Configure and verify a PPP connection between Cisco routers
    4. • Configure and verify Frame Relay on Cisco routers
    5. • Implement and troubleshoot PPPoE

Cisco CCNP®

Implementing Cisco IP Routing (ROUTE 642-902)

The Implementing Cisco IP Routing (ROUTE 642-902) is a qualifying exam for the Cisco Certified Network Professional CCNP®, Cisco Certified Internetwork Professional CCIP®, and Cisco Certified Design Professional CCDP® certifications. The ROUTE 642-902 exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs. The exam also covers configuration of secure routing solutions to support branch offices and mobile workers. Exam Topics

The following information provides general guidelines for the content likely to be included on the exam. Implement an EIGRP based solution, given a network design and a set of requirements

  1. • Determine network resources needed for implementing EIGRP on a network
  2. • Create an EIGRP implementation plan
  3. • Create an EIGRP verification plan
  4. • Configure EIGRP routing
  5. • Verify EIGRP solution was implemented properly using show and debug commands
  6. • Document results of EIGRP implementation and verification
  7. Implement a multi-area OSPF Network, given a network design and a set of requirements
    1. • Determine network resources needed for implementing OSPF on a network
    2. • Create an OSPF implementation plan
    3. • Create an OSPF verification plan
    4. • Configure OSPF routing
    5. • Verify OSPF solution was implemented properly using show and debug commands
    6. • Document results of OSPF implementation and verification plan
  8. Implement an eBGP based solution, given a network design and a set of requirements
    1. • Determine network resources needed for implementing eBGP on a network
    2. • Create an eBGP implementation plan
    3. • Create an eBGP verification plan
    4. • Configure eBGP routing
    5. • Verify eBGP solution was implemented properly using show and debug commands
    6. • Document results of eBGP implementation and verification plan
  9. Implement an IPv6 based solution, given a network design and a set of requirements
    1. • Determine network resources needed for implementing IPv6 on a network
    2. • Create an IPv6 implementation plan
    3. • Create an IPv6 verification plan
    4. • Configure IPv6 routing
    5. • Configure IPv6 interoperation with IPv4
    6. • Verify IPv6 solution was implemented properly using show and debug commands
    7. • Document results of IPv6 implementation and verification plan
  10. Implement an IPv4 or IPv6 based redistribution solution, given a network design and a set of requirements
    1. • Create a redistribution implementation plan based upon the results of the redistribution analysis
    2. • Create a redistribution verification plan
    3. • Configure a redistribution solution
    4. • Verify that a redistribution was implemented
    5. • Document results of a redistribution implementation and verification plan
    6. • Identify the differences between implementing an IPv4 and IPv6 redistribution solution
  11. Implement Layer 3 Path Control Solution
    1. • Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis
    2. • Create a Layer 3 path control verification plan
    3. • Configure Layer 3 path control
    4. • Verify that a Layer 3 path control was implemented
    5. • Document results of a Layer 3 path control implementation and verification plan
    6. • Implement basic teleworker and branch services
    7. • Describe broadband technologies
    8. • Configure basic broadband connections
    9. • Describe basic VPN technologies
    10. • Configure GRE
    11. • Describe branch access technologies

Implementing Cisco IP Switched Networks (SWITCH 642-813)

Implementing Cisco IP Switched Networks (SWITCH 642-813) is a qualifying exam for the Cisco Certified Network Professional CCNP®, and Cisco Certified Design Professional CCDP® certifications. The SWITCH 642-813 exam will certify that the successful candidate has important knowledge and skills necessary to to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture. The SWITCH exam also covers secure integration of VLANs, WLANs, voice and video into campus networks.

Exam Topics

The following information provides general guidelines for the content likely to be included on the exam.

  1. Implement VLAN based solution, given a network design and a set of requirements
    1. • Determine network resources needed for implementing a VLAN based solution on a network
    2. • Create a VLAN based implementation plan
    3. • Create a VLAN based verification plan
    4. • Configure switch-to-switch connectivity for the VLAN based solution
    5. • Configure loop prevention for the VLAN based solution
    6. • Configure Access Ports for the VLAN based solution
    7. • Verify the VLAN based solution was implemented properly using show and debug commands
    8. • Document results of VLAN implementation and verification
  2. Implement a Security Extension of a Layer 2 solution, given a network design and a set of requirements
    1. • Determine network resources needed for implementing a Security solution
    2. • Create a implementation plan for the Security solution
    3. • Create a verification plan for the Security solution
    4. • Configure port security features
    5. • Configure general switch security features
    6. • Configure private VLANs Configure VACL and PACL
    7. • Verify the Security based solution was implemented properly using show and debug commands
    8. • Document results of Security implementation and verification
  3. Implement Switch based Layer 3 services, given a network design and a set of requirements
    1. • Determine network resources needed for implementing a Switch based Layer 3 solution
    2. • Create an implementation plan for the Switch based Layer 3 solution
    3. • Create a verification plan for the Switch based Layer 3 solution
    4. • Configure routing interfaces Configure Layer 3 Security
    5. • Verify the Switch based Layer 3 solution was implemented properly using show and debug commands
    6. • Document results of Switch based Layer 3 implementation and verification
  4. Prepare infrastructure to support advanced services
    1. • Implement a Wireless Extension of a Layer 2 solution
    2. • Implement a VoIP support solution
    3. • Implement video support solution
  5. Implement High Availability, given a network design and a set of requirements
    1. • Determine network resources needed for implementing High Availability on a network
    2. • Create a High Availability implementation plan
    3. • Create a High Availability verification plan
    4. • Implement first hop redundancy protocols
    5. • Implement switch supervisor redundancy
    6. • Verify High Availability solution was implemented properly using show and debug commands
    7. • Document results of High Availability implementation and verification

Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT 642-832)

Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT 642-832) is a qualifying exam for the Cisco Certified Network Professional CCNP®, certification. The TSHOOT 642-832 exam will certify that the successful candidate has important knowledge and skills necessary to (1) plan and perform regular maintenance on complex enterprise routed and switched networks and (2) use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.
Exam Topics

The following information provides general guidelines for the content likely to be included on the exam.

  1. Maintain and monitor network performance
    1. • Develop a plan to monitor and manage a network
    2. • Perform network monitoring using IOS tools
    3. • Perform routine IOS device maintenance
    4. • Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer
  2. Troubleshoot Multi Protocol system networks
    1. • Troubleshoot EIGRP
    2. • Troubleshoot OSPF
    3. • Troubleshoot eBGP
    4. • Troubleshoot routing redistribution solution
    5. • Troubleshoot a DHCP client and server solution
    6. • Troubleshoot NAT
    7. • Troubleshoot first hop redundancy protocols
    8. • Troubleshoot IPv6 routing
    9. • Troubleshoot IPv6 and IPv4 interoperability
    10. • Troubleshoot switch-to-switch connectivity for the VLAN based solution
    11. • Troubleshoot loop prevention for the VLAN based solution
    12. • Troubleshoot Access Ports for the VLAN based solution
    13. • Troubleshoot private VLANS
    14. • Troubleshoot port security
    15. • Troubleshoot general switch security
    16. • Troubleshoot VACL and PACL
    17. • Troubleshoot switch virtual interfaces (SVIs)
    18. • Troubleshoot switch supervisor redundancy
    19. • Troubleshoot switch support of advanced services (i.e., Wireless, VOIP and Video)
    20. • Troubleshoot a VoIP support solution
    21. • Troubleshoot a video support solution
    22. • Troubleshoot Layer 3 Security
    23. • Troubleshoot issues related to ACLs used to secure access to Cisco routers
    24. • Troubleshoot configuration issues related to accessing the AAA server for authentication purposes
    25. • Troubleshoot security issues related to IOS services (i.e.,finger, NTP, HTTP, FTP, RCP etc.)